How To Clean A Synthetic Gun Stock

Rays123 · Jul 29, 2010

I recently purchased a santa barbara customs spanish mauser. someone has replaced the woods stock with a constructed stock. The stock has some former mud stains in the actual grains of it, i have tried everything I could think of to get it off merely nothing is working. Whatever idea how to make clean information technology?

Gunplumber Mike · Jul 29, 2010

Give ArmorAll the car care product a try.

LEON MANLEY · Jul 29, 2010

Water and a toothbrush should work to get the clay out of the porous surface. Thats what I used on mine.

Early-14 · Jul 29, 2010

Early-fourteen

With the Ruger MK II syn. stock. I removed the stock from the burglarize, and all metal parts from the stock. Washed the stock with a castor using dish washing soap and hot water. When dry, Rub the stock with CRISCO and a cloth. I do not put crisco inside the barrel channel or inside the activeness area. The next day I wipe the stock with a clean textile, 24 hours subsequently I wipe information technology again and put the burglarize back together. Works on them one-time Rugers.

Rays123 · Jul 29, 2010

LEON MANLEY said:
Water and a toothbrush should piece of work to get the dirt out of the porous surface. Thats what I used on mine.

i rubbed on information technology for about 60 minutes and got alot out but this is just whats left and cant get off, Im tempted to come across if itll fit in the dishwasher :stir:

rabbithound · Jul 29, 2010

Rays123 said:
i rubbed on it for about 60 minutes

and it went off (accidentally of course)
:rofl:

BamaBart · Jul thirty, 2010

Take the stock off and spray it downwardly with some strong degreaser. Use water and a soft brush and brush information technology thoroughly for about two minutes. Wash it with hot water and after y'all dry it then spray EZOX on information technology and wipe it downwards.

Terry May · Jul 30, 2010

Birchwood Casey makes a synthetic stock cleaner.

majg1234 · Aug eleven, 2010

used mineral spirits and a medium fibroid nylon brush to clean a remy Model sevens' stock i bought here,it had something on it that looked like white pigment,after that washed with simple green and used armour all...looks like new now

WGSNewnan · Aug 12, 2010

simple green or zep purple degreaser will usually lift all the clay out of the pores. spray and allow sit for a few minutes and rinse.

7Mag Hunter · Aug 12, 2010

WGSNewnan said:
simple light-green or zep regal degreaser volition usually lift all the dirt out of the pores. spray and permit sit for a few minutes and rinse.

I have a rifle that was rescued from New Orleans
afterward Katrina...Good, repeated soap/brush
made the stock await new....Good strong nylon castor...
Keep at it....

Bugeye · Aug 12, 2010

turn off the heater element in your dish washer
and toss it in.

gunhand1911 · Aug 16, 2010

WD40 works great !

arlessinfl · Aug 17, 2010

I would endeavor a dishwasher subsequently removing all metal and then a little bit of oil (a light weight oil, such every bit mineral oil) after dry.

wareagle5.0 · Aug 19, 2010

Bugeye said:
turn off the heater element in your dish washer
and toss it in.

x2 !!!!!

How To Clean A Synthetic Gun Stock

How to clean synthetic stock?

Rays123

Senior Fellow member

Gunplumber Mike

UAEC

LEON MANLEY

Banned

Early on-14

Member

Rays123

Senior Member

rabbithound

Senior Member

BamaBart

Senior Member

Terry May

Senior Member

majg1234

Senior Member

WGSNewnan

Senior Member

7Mag Hunter

Senior Fellow member

Bugeye

Senior Member

gunhand1911

Member

arlessinfl

Fellow member

wareagle5.0

Senior Member

Similar threads

0 Response to "How To Clean A Synthetic Gun Stock"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel